21' Pisces Daysailer 'Pesce'

The PISCES 21 DAYSAILER, inspired by the traditional Herreshoff FISH class daysailer, was designed by C.W Paine in 1999. These small yachts are finished to the highest standard of our Maine Boat Building tradition, the finest daysailer/weekender you’ll find on the coast of Maine or anywhere else . ‘Pesce’ has been lightly sailed in Maine during summer months only. She is professionally cared for, stored indoors and is ready to launch.

PRICE | $ 72,900

BOAT TYPE | Pisces 21 Daysailer
DESIGNER | Chuck Paine
BUILDER | Classic Boat Shop
LOA | 21 Feet
BEAM | 7′ 1″
DRAFT | 2′ 11″

DISPLACEMENT | 3,250 lbs
AUXILLIARY | Beta 14 inboard diesel (82 hrs)
LWL | 16′ 4″

The full keel fiberglass hull is infused using Vinylester resin. The hull is Awlgrip painted white with Torreador Red Awlgrip boottop stripe. The rudder is also molded fiberglass with a foam core. The lead ballast keel is externally bolted with 9 X ½” #316 grade Stainless Steel bolts and the rudder pintles and gudgeons are also #316 stainless steel. Hand laid up fiberglass deck with vinylester resin cored with foam and finished in Awlgrip™ with non-skid additive.

  • Varnished teak ‘Herreshoff’ style sheerplank with brass half oval
  • Varnished teak toe rails
  • Varnished ash tiller
  • Large and deep cockpit with 6 ½ foot seats are teak
  • Coamings, inner transom and trim are varnished
  • Outboard cockpit shelves for storage
  • Custom teak boom crutch

The mast is keel stepped and includes two topping lifts and two internal halyards (main & jib). The mainsail boom has jiffy reefing setup. All halyards, reef, and sail control lines are easily controlled from the safety of the cockpit. Mainsheet is 4:1 tackle on a traditional custom bronze traveler with a Cam cleat near the helmsman. Standing rigging is 1 X 19 stainless steel shrouds with bronze turnbuckles. Running rigging is low stretch braided rope.

The cuddy cabin has two stowage outboard shelves with fiddles, hanging hooks for lines and foul weather gear.

  • Authentic Herreshoff pattern mooring cleats- one 10” on foredeck and 2-7” aft port and starboard
  • Bronze cockpit cleats: (2)4” and (1)5”
  • Custom Herreshoff bronze bow chocks
  • Custom cast bronze coaming clips
  • Awlgrip painted non skid decks
  • Teak sheer plank with 1/2 round brass oval
  • Teak cockpit doors-varnished
  • Teak cockpit sole
  • Teak engine box cover -varnished
  • Beta 14 HP, 2 cyl.diesel (82 hrs)
  • Max Prop two blade feathering prop
  • Heat exchanger and tank updated(2020)
  • Garmin 741x touch screen GPS color chart on swing out bracket (2016)
  • Main battery switch with 4 breaker panel for accessories and lights
  • Bilge pump with auto/manual switch panel
  • Custom JM Reineck bronze nav lights (Port and starboard)
  • 12V outlet
  • One series 24 AGM battery
  • Solar panel Power film (2016)
  • Marconi rig, Carbon mast painted with white Awlgrip™ finish,
  • Jiffy reef system (mainsail)
  • Main halyard bronze #16 self tailing winch (2016)
  • Harken mainsail track upgrade with teflon luff slides (2016)
  • 2 Harken #16 self-tailing winches in custom bronze bases for spin sheets
  • Harken 8” aluminum winch handle


  • Roller furling Schaefer CF 500 (2016)
  • Running rigging and hardware update (2016)
  • Main Sailing Partners: Main with two reef points
  • Furling jib 100% (new 2016)
  • Spinnaker package with carbon pole
  • Full cockpit boom tent/mainsail cover (Sunbrella ™ ‘toast’ color)
  • Windex #10 mast head wind direction
  • Plastimo Mini Contest bulkhead mounted compass
  • 36” manual bilge pump
  • Winch handle
  • (4) boat fenders with fender covers and lanyards
  • Mason R3 Anchor with 5’ chain/100’ rode and storage bag

Details are believed to be correct however, are not guaranteed by Classic Boat Shop, Inc. Offers subject to change.