brokerage detail listing
Vinyard Vixen | Williwaw | 1974


Sistership pictured
Current photo of Williwaw


Interior looking aft
Hatch and fore deck


Side deck looking aft
Double end transom
NAME: Williwaw |
|
TYPE: Cruising Sailboat |
BUILDER: Martha’s Vinyard Shipyard |
DESIGNER: Tom Hale |
YEAR: 1974 |
DISPLACEMENT:8,600 lbs |
BALLAST:3,240 lbs |
LOA:29’ 7” |
BEAM:8’ 6” |
LWL:23’ |
DRAFT: 4’ 6” |
HOLDING TANK: Polymer 12 gal. manual discharge |
WATER TANK: 20 Gal Stainless Steel |
MAINSAIL: |
JIB : Roller Furling 100% |
ENGINE:2 GM 20F |
FUEL:12 Gal Aluminum tank |
CONSTRUCTION: Hand laid fiberglass hull and deck, Awlgrip hull Navy blue, molded non-skid pattern on deck, bow rail, varnished grab rails and toe rails
INTERIOR JOINERY AND FINISH: V berth forward with 6’ headroom, shelves outboard, head to port, oiled teak trim
STANDING AND RUNNING RIGGING: Aluminum spars with stainless steel standing rigging, rigged for spinnaker
STEERING: Tiller
EQUIPMENT:15 lb CQR anchor, manual whale gusher bilge pump in cockpit
ENGINE: Yanmar 2 GM 20F Installed in 2002, with a three blade Max Prop
ELECTRONICS: Datamarine speed and depth, Ray 45 VHF
ELECTRICAL:12 V DC system, two 24 series batteries, master switch and fuse panel
SAILS: Furling jib , 100% (2006), Main (2007), spinnaker
PLUMBING: Manual FW hand pump at galley sink, , Raritan head with holding tank
COMMENTS: A classsic Herreshoff Rozinante inspired Hale designed double ender serves as a day sailer and rugged cruiser. The hull and rig are very solid. Club-footed jib makes single-handing easy. This boat needs some TLC but with a bit of ‘elbow grease’ could easily be transformed to a wonderful overnighter/weekender. The boat is structurally sound and has had some recent upgrades to cosmetics and sails.
OFFERED FOR: SOLD LOCATION: Bernard, ME
